One edge diamond milling cutter aluminum alloy high gloss cutting cutter NC machining tool

The single crystal diamond tool is brittle, the blade is very sharp, and it is prone to chipping when it is impacted. Therefore, it should be used under balanced and vibration-free working conditions as much as possible. At the same time, the rigidity of the workpiece and the tool and the rigidity of the entire system should be improved as much as possible. To increase its anti-seismic capacity, it is advisable that the cutting amount be less than 0.05mm.
Higher cutting speed can reduce the cutting force, while low-speed cutting will increase the cutting force, thereby accelerating the tool chipping failure. Therefore, the cutting speed should not be too low when using single crystal diamond tools.
It should be avoided to contact the single crystal diamond tool with the workpiece or other hard objects in a static state to prevent bumping the cutting edge and avoid stopping the tool without leaving the workpiece during cutting.

The tool can be re-ground several times: the raw materials of the tool are screened according to industry standards to ensure that the tool does not need to be replaced when the quality of the tool is worn. Save processing costs.

1) In the process of selecting tools for processing different materials and achieving different effects, it is recommended to use tools with short cutting edges as much as possible. Because the cutting edge is too long or the tool body is too long, it will cause the whole movement and deflection during processing, which will lead to the damage of the tool and the quality of the processed product.
2) Be sure to use a suitable size of the jacket, because the jacket is severely worn or not round enough and the inner hole is tapered, it cannot provide enough clamping force, resulting in vibration or twisting of the tool handle and flying off.
3) When the tool handle is found to have uneven contact marks or grooves after the tool is clamped, it indicates that there is slippage or the inner hole of the fixture is deformed. The jacket should be replaced immediately. The tool handle and the collet must be fully tightened to prevent the tool handle from breaking or accidents.
4) Keep the knives clean after work, and use standard industrial solvents to remove dirt stuck to the knives.
5) Do not arbitrarily sharpen the tool and change the shape of the tool, because every grinding process requires professional grinding equipment and professional grinding skills. Otherwise, it is easy to cause the knife edge to break and cause accidents.

Diamond Tool Re-lapping / Polishing/Re-shaping

We supply service for re-lapping and polishing the diamond tools to increase tool life and performance. The tools can be re-polished about 60-70 times.We have more than 150 trained technicians who can offer fast re-polishing service for diamonds tools.For more details,please contact our sales.

Diamond Jewellery Manufacturing Consultation

We also provide consultation service in setting up new production line for jewellery making. With about 30 years of experience in the jewellery manufacturing industry. We have rich experience for jewellery making. We have full range of diamond tools that used for jewellery cutting and texturing.

Our technicans will give you valuable suggestions on how to selection the most suitable tool and machines for your company.

1. Customers send detailed inquiry to us by email;

2. We reply with price, specifications, packing, photos, and other details;

3. Both of us agree the price and confirm the details;

4. We write the proforma invoice and send to customers;

5. Customers make deposit;

6. We make mass production samples;

7. We send mass product samples or send photos to customers for approval;

8. Customers confirm the mass production samples;

9. We start mass production.(we have huge stock for most standard end mills);

Business Terms

Accepted Delivery Terms: FOB,CNF,CIF

Accepted Payment Currency: USD, CNY

Accepted Payment Type: T/T, Western Union

Nearest Port: Guangzhou port, Shenzhen port, Shanghai port

Response Rate (last 30 days)

98.6% of buyers who contacted this supplier received a response within 24 hours.

Average Response Time (7 days)

The supplier's average response time of received inquiries is within 12 hours.

Quotation Performance (last 30 days)

The supplier have sent 33 quotes to buyers in last 30 days.

Q: Are you Manufacture?

A: Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q: What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1. Make sure work piece and machine are stable and use a precision holder.
• 2. Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3. The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.

                      ShenZhen Joeben Diamond Cutting Tools CO,.Ltd

         Joeben is a national high-tech enterprise that independently develops,produces and sells high precision cutting tools and their supporting .After several years of efforts and exploration ,it has been far ahead by its excellent quality and high-quality serivce in cutting tool industry .Diamond cutting tool,naturral diamond(ND)cutting tool,Polycrystaline diamond (PCD)cutting tool,polycrystalline cubic boron nirtide(PCBN)cutting tool,CBN cutting tool,PCD polishiing cutter,chamfering cutter,milling cutte,high optical cutter,acrylic diamond polishing cutter and high-performance metal cutting tool,etc.are our major products,which have been mainly applied in the processing of high-end brand mobile phone’s shell,such as apple and Samsung,the indusrty of taransportation components and.Our company is also expert in the polishing processing of aluminum alloy,acrylic,plastic and light guide plate,etc..All of our products have passde ISO9001 quality system certification.

The company began to design and develop CNC machine tools in 2017and has met its own processing needs.

At present, the company has 80 employees, including 15 engineering design team, 50 production staff and 10 quality inspection staff.

Our company's vision is to build a world-class quality cutting tool brand.