overview

Application scope of natural diamond milling cutter: hardware parts; Auto parts; Surface treatment; Craft products; Fine carving; Copper batch flower; Mobile phone metal keys; Mobile phone case; Digital shell; Metal highlight batch flower; Watch surface, word nail; The case reflects the knife; Nameplate, sign highlight batch flower; Car CD pattern; Car colorful pattern; Car sun pattern; Aluminum products highlight; Electrical shell batch flower; Electrical panel; Vehicle panel; Computer peripherals; Transparent computer case; Acrylic polishing; Compression (plexiglass) highlight (polishing) chamfer; A lens; Windows; Motor rectifier fine car, etc. Mainly used for all kinds of metals, gold, silver, copper, aluminum alloy, zinc alloy and non-metallic materials, acrylic, PVC, PC, plastic and other materials of high light chamfering and straight edge mark light cutting, cutting surface bright mirror highlight effect, long service life. According to the requirements of customized tool tip diamond width, Angle, material, tool bar size. R Angle arc can be controlled in 0.02-0.05, chamfering knife commonly used specifications in 45°, 75°, 78°, diamond width is 3.0* 3.0mm.
Processing features: strong stability, specular highlight, smooth chip, reduce cutting resistance, improve processing efficiency and tool life.
Cutting tool can be repeatedly grinding several times: cutting tool raw materials using industry standards screening, to ensure that the quality of the tool in the appearance of wear, no need to change the tool, our company provides grinding services, after our company grinding the tool, restore the cutting quality of the past, effectively save the processing cost.
Single crystal diamond tool brittleness is large, the blade is very sharp, when the impact is easy to produce collapse edge, so as far as possible in the balance, no vibration of the working conditions to use, but also should be as far as possible to improve the rigidity of the workpiece and tool and the rigidity of the whole system, increase its seismic capacity, cutting dosage below more than 0.05mm is appropriate.
High cutting speed can reduce the cutting force, while low cutting speed can increase the cutting force, thus accelerating the tool collapse failure. Therefore, the cutting speed should not be too low when using single crystal diamond tool.
Avoid contact between the single crystal diamond tool and the workpiece or other hard objects in the static state, so as to prevent injury to the cutting edge and avoid shutdown when the tool does not leave the workpiece
Diamond knife blade is easy to damage, when the blade does not work with rubber or plastic cap to protect the blade and put in a separate knife box for storage, before each use with alcohol to clean the blade before working
Maintain the environment and machine performance stability, personnel operating proficiency, etc., have an impact on the life of the tool.

PCD diamond Tool: Natural diamond is expensive, diamond is widely used in cutting or polycrystalline diamond (PCD), since the early 1970s, the use of high temperature and high pressure synthesis technology to prepare polycrystalline diamond (PCD blade, referred to as the successful development of polycrystalline diamond, In many cases, natural diamond tools have been replaced by synthetic polycrystalline diamond. PCD raw material source is rich, its price is only tens of one to one tenth of natural diamond. PCD tool can not grind out extremely sharp edge, processing workpiece surface quality is not as good as natural for non-ferrous metal and non-metallic fine cutting, it is difficult to achieve ultra-precision mirror cutting.

Diamond Tool Re-lapping / Polishing/Re-shaping

We supply service for re-lapping and polishing the diamond tools to increase tool life and performance. The tools can be re-polished about 60-70 times.We have more than 150 trained technicians who can offer fast re-polishing service for diamonds tools.For more details,please contact our sales.

[Tool selection] Reasonable selection and maintenance of tools to facilitate the use of tools efficiency, conducive to the use of tools times and duration, cost control, JOEBEN tool has the following suggestions:
1, according to the structure of the processed product, material and processing hardness of the appropriate tool type.
2, check the power and stiffness of the machine tool, so that the required tool diameter can be used on the machine tool.
3. The overhang of the tool on the spindle should be as short as possible to reduce the impact of the tool axis and the position of the workpiece on the impact load.
4, the use of suitable for the process of tool pitch, so that when cutting without too much blade and workpiece meshing caused by vibration, on the other hand, in milling narrow workpiece or milling cavity to keep the blade and workpiece meshing.
5, try to use the feed per blade, so as to obtain the cutting position when the chip is thick, so as to reduce the tool wear. The indexable blade with positive front Angle groove is used to obtain smooth cutting power.
6, choose suitable for the workpiece width of the tool diameter.
7, choose the appropriate main deflection Angle.
8. Place each tool in a regular and orderly manner.
9. Follow the rules of tool maintenance and repair, and monitor tool wear condition.
With super hard abrasive processing hard brittle and hard toughness difficult processing workpiece, its consumption is very small, heat treatment materials below 50 degrees directly high-speed rough processing to fine processing, reduce the number of tool change, save the production time, stable and reliable, fast chip removal, and can maintain its sharpness and abrasive shape for a long time, not only can ensure the machining accuracy of the workpiece, And greatly improve the processing efficiency, while solving the problem of environmental pollution. Ultra-fine and high hardness diamond material, to ensure high precision, effective cutting burr, U-shaped groove design at the blade, large front Angle, effectively reduce cutting resistance, convenient and smooth chip removal, improve work efficiency. Welcome to Joben.

• Suitable for workpiece : Carbon Steel, Aluminium alloy, Cuprum, Acrylic
• HRC: 45/55/60/65 HRC ,After quench, for processing large hardness of 150°
• Other Service: OEM/ODM or custom-made
• Effect: cut aluminum parts in large area, saving time and labor
• Machining parts:Outer circle and inner circle of turning parts

Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.

                      ShenZhen Joeben Diamond Cutting Tools CO,.Ltd

         Joeben is a national high-tech enterprise that independently develops,produces and sells high precision cutting tools and their supporting .After several years of efforts and exploration ,it has been far ahead by its excellent quality and high-quality serivce in cutting tool industry .Diamond cutting tool,naturral diamond(ND)cutting tool,Polycrystaline diamond (PCD)cutting tool,polycrystalline cubic boron nirtide(PCBN)cutting tool,CBN cutting tool,PCD polishiing cutter,chamfering cutter,milling cutte,high optical cutter,acrylic diamond polishing cutter and high-performance metal cutting tool,etc.are our major products,which have been mainly applied in the processing of high-end brand mobile phone’s shell,such as apple and Samsung,the indusrty of taransportation components and.Our company is also expert in the polishing processing of aluminum alloy,acrylic,plastic and light guide plate,etc..All of our products have passde ISO9001 quality system certification.

The company began to design and develop CNC machine tools in 2017and has met its own processing needs.

At present, the company has 80 employees, including 15 engineering design team, 50 production staff and 10 quality inspection staff.

Our company's vision is to build a world-class quality cutting tool brand.