Carbide Ball End Mill 2 Flutes Tungsten Carbide taper neck ball
nose End Mill Cutter/carbide End mills
overview
1. Fully enables running at rough machining parameters, resulting
in finish surface quality.
2. Excellent performance in machining titanium, stainless steel and
high temperature alloys.
3. The coating provides longer tool-life or increased
cutting-values.
4. Suitable for all types of steel or metal.
Original raw micro grain material, high hardness and T.R.S
a, Material: tungsten carbide
b, TRS: >3600 N/mm2
c, HRA: 91.8-92.4, HRC:45/55/60/65
d, Grain size: 0.2-0.6μm
e, Helix angle: 30°-45 °
Diameter of cutting edge: 0.2-0.9mm; 1-20mm
Size: Diameter 1.0mm-20mm standard and non-standard.
Cutting Form: Square,Ball nose, Corner Radius, Taper Flute, etc.
Type of flute: 2/3/4
Other products: Drills,reamer, tool holders, ER collet, boring cutters, carbide
inserts, cutter heads,etc.
【introduction 】usually three or four blade and multi-blade, mainly used for CNC,
computer gongs, precision carving machine, CNC lathe, automatic
lathe or other machine tools on the workpiece precision machining
tools.It features high machining efficiency, fast machining speed,
high machining accuracy, good surface roughness of workpiece, high
chip conductivity, high feed, long service time, etc. It is
suitable for dry cutting and cooling cutting.
Blade diameter X blade length (blade height/blade thickness/blade
width) X air-proof length
1. This type of milling cutter is for aluminum alloy processing, has 2
/ 3 flutes, flat and ball nose, without coating.
2. As the aluminum is softer, require high speed cutting. And our
end mills for aluminum is single margin design, edge-line is very
sharp, coating will make it dull. Besides, coating will lead to
sticking to the cutters.
3. Milling cutter for aluminum owned good chipping discharge,
suitable for high speed and large scale cutting.
| Flute Diameter | Flute Length | Shank Diameter | Total Length | R | Flutes |
| 1 | 2 | 4 | 50 | 0.5 | 2 |
| 1.5 | 3 | 4 | 50 | 0.75 | 2 |
| 2 | 4 | 4 | 50 | 1 | 2 |
| 2.52 | 5 | 4 | 50 | 1.25 | 2 |
| 3 | 6 | 4 | 50 | 1.5 | 2 |
| 3 | 6 | 4 | 50 | 1.5 | 2 |
| 4 | 8 | 4 | 50 | 2 | 2 |
| 5 | 10 | 5 | 50 | 2.5 | 2 |
| 5 | 10 | 6 | 50 | 2.5 | 2 |
| 6 | 12 | 6 | 50 | 3 | 2 |
| 7 | 14 | 8 | 60 | 3.5 | 2 |
| 8 | 16 | 8 | 60 | 4 | 2 |
| 4 | 8 | 4 | 75 | 2 | 2 |
| 6 | 12 | 6 | 75 | 3 | 2 |
| 8 | 16 | 8 | 75 | 4 | 2 |
| 9 | 18 | 10 | 75 | 4.5 | 2 |
| 10 | 20 | 10 | 75 | 5 | 2 |
| 12 | 24 | 12 | 75 | 6 | 2 |
| 4 | 8 | 4 | 100 | 2 | 2 |
| 6 | 12 | 6 | 100 | 3 | 2 |
| 8 | 16 | 8 | 100 | 4 | 2 |
| 10 | 20 | 10 | 100 | 5 | 2 |
| 12 | 24 | 12 | 100 | 6 | 2 |
| 14 | 28 | 14 | 100 | 7 | 2 |
| 16 | 32 | 16 | 100 | 8 | 2 |
| 18 | 36 | 18 | 100 | 9 | 2 |
| 20 | 40 | 20 | 100 | 10 | 2 |
| HRC45 | HRC55 | HRC60 | HRC65 |
| YG10X | YG10.2 &WF25 | Germany K44 & K40 | H10F |
Grain Size:0.7um
Co:10 %
Flexural strength:3320N/mm2 | Grain Size:0.6um
Co:10 %
Flexural strength:4000N/mm2 | Grain Size:0.5um
Co:12 %
Flexural strength:4300N/mm2 | Grain Size:0.5um
Co:10 %
Flexural strength:4300N/mm2 |
F-ED-001 end mill Features:
1. Suitable for aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance
and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil
mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger
than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany,
Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
- Other Service: OEM/ODM or custom-made
- Machining parts:Outer circle and inner circle of turning parts
- Product composition:Tungsten steel
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for
gurantee the quality.
We also trading related tools for customers because we are in these
field over 10 years, we are very familiar Chinese market tools. we
usually help our customer choose the best suitable related tools
for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need
about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory
price and fast delivery.
Our advantage:
- 1. 10 years experience in carbide roll and cutting tool
manufacturing
- 2. From row material to tool produdtion.
- 3. World top level prodution equipment and rich experience team
ATTACTION:
- 1.Make sure work piece and machine are stable and use a precision
holder.
- 2.Please adjust the speed,feed and cutting depth according to
actual cutting conditions.
- 3.The milling conditions are for an end mill where the tool
overhang length is less than 4*D(mill diameter). When the tool
overhang length is longer, please adjust the speed,feed and cutting
depth.
