Carbide Ball End Mill two flutes ball nose end mill for steel and
other metal 3A series
overview
Professional custom cutting cutter of all kinds, professional
processing and application to create the whole carbide endmill
series, with flexibility, high-speed and economic advantages, aimed
at providing excellent cost performance.
Compared with the previous year, the cutting amount of the blade
triangular slant groove design is larger, realizing the
unprecedented high feed processing, the efficiency is increased by
200%, the precise chamfering contour is round and can effectively
avoid the product bruising, so that the full effect of the product
blade can be exerted.Double edge belt effectively removes burrs,
USES the processed hole surface smoothness, the tolerance range is
small, may replace part of the rough knife to use.Screw design,
large capacity smooth chip removal, prevent sticking knife, reduce
heat, hard alloy good compressive strength.
【JOEBEN tool features 】JOEBEN company tool has the following characteristics:
1, long use time, sharp edge design, combined with new coating
treatment, the tool is not easy to wear;
2. Large choice, same blade diameter, different blade length and
full length, convenient for different degrees of processing speed
and distance;
3, wide processing materials, cast iron, stainless steel, carbon
steel, hardened steel, graphite, composite materials, acrylic and
other different hardness materials for precision processing;
4. It is not easy to break the blade. The blade adopts scientific
structural design to maximize the rigidity and strength of the
blade;
5. High machining efficiency, designed for precision and speed
milling.
| HRC45 | HRC55 | HRC60 | HRC65 |
| YG10X | YG10.2 &WF25 | Germany K44 & K40 | H10F |
Grain Size:0.7um
Co:10 %
Flexural strength:3320N/mm2 | Grain Size:0.6um
Co:10 %
Flexural strength:4000N/mm2 | Grain Size:0.5um
Co:12 %
Flexural strength:4300N/mm2 | Grain Size:0.5um
Co:10 %
Flexural strength:4300N/mm2 |
| EDP No. | Dia(mm) | Angle | Flute Length(mm) | Flutes | Shank Dia(mm) | OverLength(mm) |
| 2207010605 | 0.4 | 90 | 8 | 2 | 4 | 45 |
| 2207010229 | 0.5 | 127 | 0.87 | 2 | 4 | 50 |
| 2207010160 | 0.5 | 90 | 5 | 2 | 4 | 50 |
| 2207010342 | 1 | 71 | 9.94 | 2 | 4 | 50 |
| 2207010089 | 1 | 90 | 5.00 | 2 | 4 | 50 |
| 2207010085 | 1.2 | 120 | 5 | 2 | 4 | 50 |
| 2207010606 | 1.2 | 90 | 5.0 | 2 | 4 | 50 |
F-ED-001 end mill Features:
1. Suitable for aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance
and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil
mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger
than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany,
Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
- Other Service: OEM/ODM or custom-made
- Machining parts:Outer circle and inner circle of turning parts
- Product composition:Tungsten steel
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for
gurantee the quality.
We also trading related tools for customers because we are in these
field over 10 years, we are very familiar Chinese market tools. we
usually help our customer choose the best suitable related tools
for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need
about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory
price and fast delivery.
Our advantage:
- 1. 10 years experience in carbide roll and cutting tool
manufacturing
- 2. From row material to tool produdtion.
- 3. World top level prodution equipment and rich experience team
ATTACTION:
- 1.Make sure work piece and machine are stable and use a precision
holder.
- 2.Please adjust the speed,feed and cutting depth according to
actual cutting conditions.
- 3.The milling conditions are for an end mill where the tool
overhang length is less than 4*D(mill diameter). When the tool
overhang length is longer, please adjust the speed,feed and cutting
depth.
